Foldable Hiccup sword 3D print model

I've had too many problems trying to print this design. It's just not worth it. The grip should probably have been made separate so the grip, pommel, and guard would have best been made with three prints, perhaps best with some tabs and slots to align and interlock. Further, the blades have 0.5mm between the holes and face of the blade so your printer must have a 0.5mm or smaller nozzle, and it should probably be 0.25mm so there can be two walls between the holes and face.

As I told you, you have to set your slicer software settings right for printing the small pieces. An average 3d printer use a 0,4mm nozzle, so there's no problem to make the 0,5mm walls, and if you have a bigger nozzle diameter, you can always change it and have many different nozzles, which is also recomendable since nozzles sometimes needs to be changed ocassionaly. Only one wall is strong enough for the blades, I've printed a lot of these swords and never got one of these pieces broken. And there's no missing files anymore as you mentioned in your review.