Ready to print Werewolf Mask With Movable Jaw 3D model (digital file).

You can see my models after printing here: https://www.instagram.com/sonndersmith/

The mask consists of 2 parts. Base part and lower jaw are connected by joint imbedded in design. A hole in a mouth may be covered with flexible black fabric from inside (it might also act like rubber band pulling lower jaw upwards). Moving of lower jaw of the mask is caused by pushing it down with user's chin.

You need at least 220 x 210 x 200 mm build volume to print the mask. Contact me if your printer is smaller and I’ll split the files up according to your parameters.

Average wall thickness of each big part has an optimal value for resin casting: 4-5 mm.

I don’t mind if you’re going to sell masks made using my models, all I want from you is tagging me on Instagram in your relevant posts (@sonndersmith).

Listing contains:

• printable files in OBJ format;
• printable files in STL format.

The mask model is scaled for an average 57 cm girth head, but the size could be changed if necessary.

Contact me if you have any questions.