Tsukuyomi Moonlit Greatbow and Quiver from Final Fantasy XIV 3D print model

This 3D model is designed for the purpose of 3D printing and cosplay. You may need a direct-drive 3D printer to achieve precise printing around the hinges so that they don't just fuse together. I recommend printing the hinges in something stiffer than PLA like PETG if you're aiming to have the hinges be functional as PLA will wear down rather quickly and thus result in the hinges loosening quickly. The majority of the pieces are easy to 3D print.

The quiver has an issue where it will autofill the top empty section in cura. Print the top quiver piece on its back and tear away the inner supports instead.

Use the embedded YouTube video as a guide. Please contact me either here or on my other social media if you have questions or encounter issues when using the 3D model.

For a nicer looking paint job, spray with gold spray paint for a smooth even coating with no streaks and hand-paint all the other colors.Infill of about 10-15% for bow ends.Infill of about 20% for bow arms closer to the center. Infill of about 30-35% for the bow center.Infill of about 80% for hinge sections.Infill of about 40% for the arrow.

I am willing to 3D print the chunks and ship it to you if needed.

Instagram: https://www.instagram.com/cosplay_made_design/YouTube: https://www.youtube.com/channel/UC9I3fI86BvZxYEdB0MHCeUQFor a commercial license: patreon.com/Cosplay_Made_Design