3D printable stl files designed for cosplay. No need to mirror when printing two as the grenade launchers are already symmetrical. Use about 10-15% infill when 3d printing. It is designed to be printed on a minimum bed size of about 210mm x 210mm. There is a space for a simple led light behind the muzzle so it is recommended to print the muzzle in a clear filament and pour a little bit of colored epoxy resin for the glow effect.

Use the embedded YouTube video as a guide. Please contact me either here or on my other social media if you have questions or encounter issues when using the 3D model.

Scale the model up by x10 for proper scaling.Infill of about 10-15% for most parts is fine for most parts.

Instagram: https://www.instagram.com/cosplay_made_design/YouTube: https://www.youtube.com/channel/UC9I3fI86BvZxYEdB0MHCeUQFor a commercial license: patreon.com/Cosplay_Made_Design