Start Lever for Saitek Throttle Quadrant

Engine start levers that made for saitek throttle quadrant. I used hot silicone to slot levers. (Hot silicone doesn't make any damage on device surface.) Levers moves back by its own rubbers inside. It works in all simulation programs.

You will need 2 tire, 10 bolts and nuts standard M3 x 5 mm.

3D PRINTING SETTINGS

Layer height: 0.2mmNozzle Diameter : 0.4mm Infill: %30

To get in contact: sindemirci.96@gmail.com