1/3
I have created several sets of Gutters for use on 7mm/ft scale buidings on my model railway. I designed them for a model building I have been making and for this building the roof has very little overhang and so I only wanted about 0.5mm offset from the wall. If you need a larger overhang for your eaves I am also going to be uploading separate versions with offsets up to 4mm in 0.5mm increments.
In this download I have included gutter sections representing real life lengths of 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, 3.5m & 4m which can all be joined together to make whatever length you need.
There are also end caps, downpipe outflow connections and 45 & 90 degree bends, along with various lengths of downpipes which can all be connected to create a drainage system to suit your model building.
The photos include some pretty cruel extreme close-ups so you can hopefully see how the parts can be joined together.
Different offset versions available here:
0.5mm offset https://www.cgtrader.com/3d-print-models/hobby-diy/other/roof-gutter-7mm-scale-o-gauge-model-railway-half-mm-offset
I sliced the files in Lychee and printed on my Anycubic Photon Mono X using Siraya Tech fast white resin.
I print the gutters with the offset directly on the buildplate and find they need no supports. I add some light supports to the downpipes and other accessories.
