This is an add-on to my Model Railway Retaining Walls with Arches.https://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-retaining-walls-with-arches-modular-design

Also see Underpass and Commercial Premises Add-on Optionshttps://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-brick-arch-underpass-add-on-componenthttps://www.cgtrader.com/3d-print-models/hobby-diy/other/model-railway-brick-arch-commercial-premises-add-on-component

These items have been designed at 1/76 scale but can be printed at other scales.Primarily these items have been designed to be printed on a FDM printer but can also be printed on a Resin Printer.designed at OO gauge, 1/76.2 scale.for HO gauge print at 87%, 1/87 Scale,for O gauge UK at 175%, 1/43.5 Scale,for O gauge International print at 158%, 1/48 Scale,for N gauge print at 51.49%, 1/148 Scale, (Caution: I have not printed this model in N gauge so can’t guarantee its printability)

This set of designs are for a sloped section of wall that is ideal for a road or something similar. These have been design to attach to my other arched wall designs. They come in several sections that work up to the 100mm or 120mm arched wall heights. I have also done the designs in left and right hand slopes.

The walls are 9mm deep and the pillars are 15mm deep and about 12mm wide. each section is about 126mm long. The angle of the slope is 9 degrees.

The files are labelled 120, 100, 80, 60, 40 as left and right hand. The number represents the height at which the slope top starts, 120 and 100 match my other similar designs.

These items are designed to be bought with my original design ‘Model Railway Retaining Walls with Arches’ which includes blank arches, end walls, and other associated items.

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445