Re-usable lost wax casting silicone mold pattern frame, with 3mm sprue hole

• FDM or RESIN printable.

• Size approx: 115mmH x 50mmW x 27mmD (2.65mm wall thickness)

• Can be enclosed with rubber bands and flat sections of glass or wood

• Extra hight for vacuum clearance

• Print recommendations: Print horizontally flat (as provided in file) for maximum strength, support cone only.

• Use 3d resin compatible liquid silicones.

-Notes for readily available liquid silicones :

1. Condensation cure silicones curing process less likly to fail with resin 3d printed parts (when part is fully cured).

2. Caution when using Platinum cure silicones, insure resin printed parts are fully cured and carry out compatibility test, parts that are not fully cure can interfere with platinum cure process and render rubber mold un-usable.

3. Silicone shore hardness A30-A40

*rings and glass for illustration purpose not include