Re-usable lost wax casting silicone mold pattern box, with 3mm sprue hole

• FDM or RESIN printable.

• Size approx: 70mmH x 50mmW x 28mmD (2.65mm wall thickness)

• Print ready/tested, with 0.35mm additonal back plate for squish compensation (resin printers).

• Print recommendations: Print flat side down to build plate, support cone with 2/3 light/medium supports.

• Can be enclosed with rubber bands and flat section of glass or wood.

• Use 3d resin compatible liquid silicones to avoid silicone curing inhibition (shore hardness A30-A40).

*rings and glass for illustration purpose not include