This 3D-set requires a minimum print surface of 160 x 80mm of your resin 3D-printerThe steel arc bridge is in early 1900s style with riveted plate beams for H0-scale model railroads. The bridge is printed in two parts and joined afterwards.Several bridges can be joined for longer spans with concrete- or stone piers supporting from below.The bridge is developed for all major brands of tracks, both sectional with roadbed and standard flextrack without roadbed.

Ready-to-print super detail items set for Model Railroad in H0-scale. The STL-files with / without supports are included and all neccesary preparations are made to simplify print. Simply download, un-zip, slice and print. Enjoy!

These models are developed and test printed to verify function, detail and printability. Testing has been performed on a range of consumer grade 2k, 4k and 8k resin 3D-printer to verify function. We recommend using one of the following resins for high strength and super detail:

• Siraya tech fast gray
• Anycubic ABS-like PLUS gray

IMPORTANT GENERAL NOTE TO AVIOD WARPING / SCEWING:

• WASHING: Wash all items clean from resin preferrably in a washing mashine 6-8 minutes (Anycubic Wash & Cure 2.0). Leave all items to dry after wash properly. Preferrably over-night / 24h.
• POST CURING: All sides, including inside surfaces, MUST be exposed to the UV-light. Recommended time: 4 minutes.
• Paint the details immidiatly after post-curing using a primer. We recommend TAMAIYA Surface Primer Fine Gray.

*The Editorial licence of course includes unlimited printing for your own Model Railroad. However, the 3D models provided in this set must NOT be used for commersial production or re-sale of the 3D-models.