The Barry Allen's ring is finally here

You've seen the functional prototype but here's the real deal now

While i was making it the inside chamber where the suit is, looked like it could be a cool ring as well, so I went and made a little fidget ring , so you have an extra ring in the pack

To recap, included are:

1 - functional finger ring (with damaged or non damaged parts)

2 - non functional finger ring (with damaged or non damaged parts)

3 - ring 2 (fidget ring)

I also included a suggested parts orientation for the functional ring, keep in mind to slow down the speed a bit and use 0.1 mm layer height.

Suggested nozzle is 0.4 mm (that's the only real limit of the print if you wish to keep it at 100% - for the functional part only), but you might get away with 0.5 as well

I've also provided little animation for the functionality of the ring, those were fun to make.

Join our community and find out more at:https://www.facebook.com/groups/3282336185171090

or follow me on instagram:https://www.instagram.com/mysterymakers_3d/