This is the front mount and guide bracket for the interior door pull fabric strap, custom-engineered for the Renault Clio III RS 197 / 200 platform. Designed specifically for track day builds, cup racers, or stripped-out interiors, this bracket provides a heavy-duty, secure anchoring point for the fabric pulling strap against the interior door structure. Reverse-engineered to handle repeated mechanical leverage without flexing.

Print Recommendations:Material: ABS, ASA, or Carbon Fiber reinforced filaments (PETG-CF / PA-CF). High-tensile engineering materials are strictly required since this bracket absorbs the entire pulling force when shutting the door.Layer height: 0.20mm to 0.16mm optionalInfill: 80–100% (High density combined with at least 5-6 perimeter wall lines is mandatory to maximize structural integrity around the bolt holes and strap slot under load)Supports: may vary depending on the model orientation and print bed direction. Please consider your slicer's recommendations

Copyright and usage note: This model is intended for personal use and spare part replacement only. Commercial production requires licensing.