For RC and Diecast enthusiast.Large scales can use FDM or Resin printing. Small scale - resin.The model is combined, all the main parts are presented as separate parts, so they are easily modified or removed.
The *.stl files are in the *.zip archive.

Specs: •1:8 •1:10 •1:12 •1:14 •1:16 •1:18 •1:20 •1:24 •1:25 •1:28 •1:32 •1:43 •1:48 •1:64 •1:87The model includes: • Body • Interior • Chassis parts • Wheels • Tires • Windows and glasses for big scales.AND for WLToys 284131 BONUS files

**Attention:-For experienced model builder-Parts could need some adjustments with files or sand paper-Take care when you remove the supports-Parts should be glued.-Not recommended for kids-Be careful with the alignment of pieces when gluing.-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels-Check dimmensions of your model before printing

The car was first presented at the Turin Motor Show in 1972. In Italy this car did not become so popular, but in Poland, where the car was considered a great luxury became popular. In 1973, Polskifiat126p was put on the assembly line at the Small Car Factory in Bielsko-Biala. It was the first model that could be purchased by an ordinary Polish family, and it quickly became popular. PolskiFiat 126p, nicknamed “Maluch”, was produced until 2000. Detailed 3D model of Polskifiat126p (Maluch) for printing on a 3D printer. Suitable for Diecast collectors, RC-enthusiasts and retro car enthusiasts. Scalable STL file. European road legend now in 3D!