Easter Special Gnome Collection.

Make sure to upload a make after printing, I'll love to see them.

Happy Printing:)

3D printing settings :STL and 3MF files are included. If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

Print-in-Place, No supports needed.Multicolor 3MF0.2 Layer height ( Use 0.12 or 0.16 layer height for better quality)10%-15% Infill (I recommend Gyroid, Honeycomb or Grid)2 Walls (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)Make sure you have good adhesion.I tested this model on scale of 50% to 200%, I do not suggest smaller than 50% for the model. ( I printed it on 50% scale )

Happy Printing :)