A stylized, high-quality 3D model of a chubby sitting cat with expressive facial features. Anatomically optimized and tested for smooth 3D printing (SLA/FDM) and subsequent silicone molding or resin casting.

Production & Quality Guarantee100% Hand-Sculpted: Created entirely by a human artist from scratch. Absolutely no AI generation, prompt-to-3D tools, or automated derivative filters used.Master Model Ready: Clean geometry and solid watertight mesh, ideal as a base for custom toy production, resin casting, plaster, or DIY designer toys.Smooth Surfaces: Curvature and transitions are polished to minimize post-processing, sanding, and primer work before mold making.

Note: Digital file only. Commercial license allows printing for physical molding and reproduction.

Commercial license allows printing for physical molding and reproduction

Recommended Printing & Post-Processing Settings for Mold Making:

Printer Type: Optimized for High-Resolution Resin (SLA/DLP/LCD) printers to capture maximum surface detail. Can be printed on FDM with low layer height (0.1mm or less).

Supports: Standard supports required. Position the model at an angle (30–45 degrees) to minimize support marks on critical visual surfaces (face, details).

Infill: 100% (Solid) is recommended if used as a direct master model for heavy silicone compression or vacuum molding to avoid crushing.

Post-Processing (Critical for Silicone Molding):Ensure 100% complete UV curing.Wash thoroughly in IPA.

If using platinum-cure silicone, apply a thin layer of clear acrylic primer/sealer to prevent cure inhibition caused by some 3D resins.