This is the single-track version of my double-track lattice side bridge desk.The double-track version can be found.https://www.cgtrader.com/3d-print-models/games-toys/other/model-railway-double-track-straight-bridge-deck-lattice-sides

I have designed this so it can be printed in multiple lengths.

I have designed this item so it can be printed on most FDM 3D printers without supports, but I recommend printing with a 0.4mm nozzle.The deck section is approximately 58mm wide and 23mm high, but this comes in various lengths. 62mm, 92mm, 122mm, 150mm, 182mm, 212mm, and 242mm (There is 1mm of extra detail at each end).There are many files with this design, but you only need to download the lengths you require.

I will also look at adding some pillar supports for those who may need them.If you have any questions, please feel free to contact me.

The design has been tested on the Bambu Labs A1 printer with a 0.4mm nozzle. I used ELEGOO PLA+ Filament 1.75mm Grey https://amzn.to/4bU03sx (Affiliate Link)

This item has been designed at OO gauge, 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For TT120 Gauge print at 63.5%, 1/120 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale. will probably need a 0.2mm nozzle to print).

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445