VAULT combines a rounded architectural arch with two curved controller cradles and a broad base. Its compact, sculptural form brings a clean look to a gaming desk or display shelf. The stand prints as one connected body; no assembly is required.

• Base: 124 x 86 x 11 mm.
• Overall height in use: approximately 104 mm.
• Cradle center spacing: 80 mm.
• Each cradle is 25 mm wide.
• Supplied print orientation: approximately 124 x 104 x 86 mm.
• One printable part.

Print on the flat rear face in the supplied orientation. Build-plate supports are required beneath the arch and overhanging cradle surfaces. Check support placement and removal access in your slicer.

Suggested starting settings: 0.4 mm nozzle, 0.2 mm layers, 4 perimeters and 20% infill. Adjust for your printer and filament. Optional felt pads can be added to the contact surfaces; pads are not included.

Check the 80 mm cradle spacing and 25 mm cradle width against your own controller. Compatibility with a particular controller, balance and load capacity have not been physically tested. No universal fit or load rating is claimed.

• STL and 3MF files for the single-piece stand, in the supplied print orientation.
• STEP and FreeCAD solid models.
• Blender product and studio scenes.
• OBJ with MTL, FBX and GLB exchange files.
• English and Turkish PDF guide.
• CAD rebuild source and file inventory.

CAD files contain final solids; a rebuild script is supplied rather than a fully editable feature-history tree. Printable files use millimeters. Blender, FBX and GLB use meters; OBJ coordinates use millimeters.

The model has been digitally checked but has not been physically test-printed. Printed strength, support removal, stability and controller fit require a real print test.

High-resolution meshes are intended for 3D printing and product visualization. They are not optimized as low-poly game assets. No UV texture set is included.

ABOUT THE IMAGES

Studio, technical and clay images are rendered from the supplied model. Lifestyle and controller-use scenes are AI-generated illustrations and may differ in proportions, details, materials and lighting. Images are not photographs of a physical print.

The stand is intended for one controller supported across both cradles. Controllers shown are illustrative; their appearance does not confirm compatibility with any particular controller model or brand. Actual fit and stability require testing.

Colors and surface finishes are presentation choices. Final printed appearance depends on your filament, printer and settings. Controllers, electronics, furniture and other decorative props are not included.

Digital files only. No physical product is supplied.