Predator Mask Jungle Hunter File STL OBJ for 3D Printing 3D print model

• follow me
• FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
  
• ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/
  
• TWITTER: https://twitter.com/Cody3D
• ARTSTATION: https://www.artstation.com/cody3d/store

• YOUTUBE: https://www.youtube.com/channel/UCegptSyuzQWuU1Fow04_MKw?view_as=subscriber

- Predator Mask Jungle Hunter File STL – OBJ for 3D Printing

• in total the Model is composed of 1,8 mil points

- all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

• dimensions approximately W 27 Cm D 17 Cm H 34 Cm

- W 10 In D 6,6 in H 13 in

• the dimensions were calculated for an adult of medium height.
• however, the dimensions can be changed with each slicer,
• in this case you will find a file of the entire model, which you will need to understand how much to scale each single piece

- The thickness of the mask varies from 5 mm up to 10 mm

- all files are already in place for optimal printing

• 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,
• every part of the model in the most convenient way for you.
• Each file has been checked and repaired with Netfabb
• The parts of the model are already positioned for 3D printing
• Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

- All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing - Predator

• Predator is a 1987 American science fiction action film directed by John McTiernan and written by brothers Jim and John Thomas.[4] It is the first installment in the Predator franchise. It stars Arnold Schwarzenegger as the leader of an elite paramilitary rescue team on a mission to save hostages in guerrilla-held territory in a Central American rainforest, who encounter the deadly Predator (Kevin Peter Hall), a skilled, technologically advanced alien who stalks and hunts them down.
• Predator was written in 1984 under the working title of Hunter. Filming ran from March to June 1986 with creature effects devised by Stan Winston; the budget was around $15 million. 20th Century Fox released the film on June 12, 1987, in the United States, where it grossed $98.3 million. Initial reviews were mixed, but the film has since been considered a classic of the action genre.
• The success of Predator launched a media franchise of films, novels, comic books, video games, and toys. It spawned three direct sequels: Predator 2 (1990), Predators (2010) and The Predator (2018), and an upcoming prequel titled Prey (2022).[5] A crossover with the Alien franchise produced the Alien vs. Predator films, which include Alien vs. Predator (2004) and Aliens vs. Predator: Requiem (2007).

- wikipedia - Recommended settings for printing

• each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

- it is recommended to print with a 4-5 skirt

• Quality
• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

- *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

• As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

- the model’s parts. - The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

• Speed setups:
• Infill speed: 30mm/s
• Outer shell speed : 30mm/s
• Inner shell speed: 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

- Infill:

• Infill pattern: Grid
• Line distance: 1.5mm
• Infill overlap: 20%
• Infill layers: 0

- Support:

• Enable support: Check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid

- Line distance: 1.5mm

• LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.
• Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation
• of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this
• page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.
• Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing

- on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence