LegendGames Cauldron Set for Halloween 3D print model

Double, double toil and trouble;Fire burn and caldron bubble...

A set of three different cauldrons in 11 different variations. Featuring filled, empty and pot-on-a-fire versions, you should have enough options availabel to fill your needs. We've printed these out at the standard size and they are great with 'hero' scale miniatures. You might want to scale down a bit for 25mm scale though, as they are a bit over sized.A great little set of Halloween scenes or any witches encounters in your TTRPGs. THese would be great for Ravenloft, Cthulhu, Harry Potter or similar games with a gothic feel.

Prints shown on the green dice tray are done in V4 grey resin on a Form3 printer, at 25microns.Prints shown on the desk are from an Elegoo Mars, in water washable resin. not sure onthe resolution of those (Matt Gubser designed Barbarian printed for scale only)SUPPORTS:

Our Files are NOT supported

Why don't we support our files? File supports are a very personal thing. Our requirements will not be your requirements.They are dependant on many variables that we simply don't have any knowledge of, such as:

Print Technology usedMachine usedslicer software usedLayer hightMaterial typePlate sizeplate packing preferencespreferred print orientationAnd of course, your personal preferences for supporting your models

So, to avoid issues, we leave you to support your models in the way you prefer. After all, you know your setup and what works, we don't.

For clarity, we use Formlabs and Elegoo resin printers, and they are often need different supports for the same model and if we use different resins and l;ayer heights, we find we need different support layouts too. We tend to print on the build plate with the Form, but rafted with the Elegoos. Our build plate sizes also dictate the angles or any models and thus the supports.

Our own experiences and customer feedback have led us to the choice not to offer supported files.