Articulated Iguana with 3 different head variationsI’m excited to share the Iguana STL, featuring a detailed body and three unique head versions for you to swap and experiment with.

** What you’ll get:**

• Full iguana body (base length: 21 cm without head)
• 3 unique interchangeable heads
• Clean, print-ready files

For those who enjoy smaller prints, I also tested a scaled-down version at 8 cm (keychain size). It printed fine with no issues, but note that the articulated joints get quite thin at that scale.

Recommended Print Settings:

• Printer Type: FDM
• Layer Height: 0.16–0.2 mm
• Infill: 10–15%
• Walls/Perimeters: 2–3
• Top/Bottom Layers: 3–4
• Supports: Not required
• Brim: Optional (use if needed for bed adhesion)
• Material: PLA recommended
• Nozzle Temp: 200–210°C
• Bed Temp: 50–60°C

All parts are optimized for support-free printing, so you can simply load the file and start printing without extra setup.

Scaling NoticeThis model is carefully tuned for smooth articulation at its original size. Scaling the model up or down may affect joint tolerances, causing parts to become too tight or too loose.

Please Note:

• This is a digital download. No physical item will be shipped.
• Files are for personal use only. Redistribution, resale, or sharing of the digital files is not permitted.
• Want to sell physical prints? A commercial license is available through my Patreon.

Copyright NoticeAll designs by Kogi3D are copyrighted. With your purchase, you gain the right to download and print the design for personal use only. You are NOT allowed to resell, distribute, or modify the digital files in any form, including remixed versions. Selling prints of the design without prior authorization is prohibited.