Wargaming dreadnought WRAPPED IN CHAIN MAIL 3D print model

An original fighting platform for unforgettable confrontations.

But the armor is contaminated by a skin disease, which in no way detracts from his exploits and ferocity, quite the contrary.

This model has been completely revisited, taking into account the various suggestions made to me over time on a previous model.

For information, the height is about 100 mm on a 90 mm base.

To facilitate assembly, slots are provided for magnets (diameter 4 mm, thickness 1 mm).

It is made in several parts for easy fabrication and comfortable painting.

The pre-supported version is currently being tested and will be available as soon as manufacturing has been validated.

Files are available in STL and OBJ formats.

More projects :

https://www.cgtrader.com/Fabricejeanpier

3D PRINTING SETTINGSSupport required (if pre-supported version is not used)

Resin parameter

layer thickness: 0.04 mm

normal exposure time: 1.95 s

stop time: 0.05 s

background exposure time: 28 s

bottom layers: 4

anti-alias: 1

no surface abrazine

control of lower layers :

Lifting height Z (0) 5 mm

Z lifting speed (0) 0.5 mm/s

Z retraction speed (0) 2 mm/s

Z lift height (1) 80 mm

Z lift speed (1) 2 mm/s

Z retraction speed (1) 4 mm/s

number of transition layers 10

control of normal layers :

Z lift height (0) 3 mm

Z lift speed (0) 0.5 mm/s

Z retraction speed (0) 3 mm/s

Z lift height (1) 3 mm

Z lifting speed (1) 5 mm/s

Z retraction speed (1) 5 mm/s