Bring a real European landmark to your gaming table. This 28mm-scale miniature of Bratislava Castle sits on a faceted rock outcrop with a winding stone staircase, an open inner courtyard and four iconic corner towers. It is designed as a single watertight solid that prints on an FDM printer without supports

Technical specifications

Scale 28 mm heroic (approx. 1:56)Base Regular octagon, 75 mm across flats / 81.2 mm across corners, 4 mm thickOverall height 67.5 mmFootprint 75 × 75 mmParts 1 (single piece, no assembly)Units Millimetres (imports at correct size)Model volume approx. 92.5 cm³ (solid)Supports Not required (FDM)Recommended print settings

FDM (PLA / PLA+, 0.4 mm nozzle)

Layer height: 0.12–0.16 mm (0.12 mm for the sharpest windows and steps)Perimeters: 3Infill: 10–15 %Supports: noneOrientation: flat on the base, as supplied

Resin

Hollow the model in your slicer (2 mm walls) and add drain holes in the bottom of the base, or print solid if resin use is not a concern.Print directly on the build plate or angled with supports under the base only.Painting tipsPrime black or dark grey.Drybrush the rock in warm greys.Paint the palace walls off-white or bone, and the roofs terracotta red.Pick out the recessed windows with a dark wash or black liner. The frames catch the highlight on their own.

Included filesBA_Castle.stl: print-ready model in millimetres