This is a handy grip for Olympus Air A01 lens-style camera. It is designed for 3d printing and can be easy printed on almost any FDM printer. The grip consists of 2 parts: The grip itself and screw extension pin.

The camera is mount on the grip via standard tripod screw, that is glued with superglue to the extension pin, so it can be screwed from the bottom of the grip. Also, this grip works nice with Sony AS15/AS20 action cams in waterproof housing. It will hold camera afloat if printed watertight.

Grip itself should be printed standing on flat bottom surface, no raft/brim/supports needed. The screw pin should be printed upside down with brim. The camera mount screw has to be glued on the top of the pin afterwards.