This is a 3D Printable STL file. Does not include any hardware.

It is a 2.5" Hard Drive Caddy Adapter for B+M Key SATA M.2 NGFF SSD to SATA 3 Raiser M.2 to SATA Adapter Expansion Card.

Provides a way to mount M.2 SSD SATA III chips in a 2.5" hard drive slot. So SSD does not have to float around inside the case.

Simple Installation. conforms to 2.5" standard laptop storage size. Has cooling vents built in.

Dimensions: 100mm x 69.85mm x 7.0mm, fits SSD M.2 2230, 2242, 2260 & 2280.

Note: Does not fit SSD M.2 22110 - 110mm. Does not fit NVMe (NVMe is PCI Express only).

Effortless Storage Expansion - for modern desktops and laptop computers.

Recommended to print in PETG, but will print in PLA as well. Add supports for the slot. Prints in a little over 1 hour typically.

Recommended hardware: 4 x M3 6mm self tapping screws, 2 x M3 4mm self tapping screws, M.2 to SATA III adapter card: https://www.aliexpress.us/item/3256805313726045.html?spm=a2g0o.order_list.order_list_main.155.21ef1802z83T6G&gatewayAdapt=glo2usa.

Note: NVMe M.2 SSDs cannot be adapted to use SATA III cables. The e in the NVMe protocol stands for PCI Express, and it can only be used directly as a PCI Express device. The NVMe must be mounted directly on the motherboard, or it can be adapted to be used with the USB 3.1 protocol only.