This is a 3D Printable STL file. Does not include any hardware.

It is a 3.5" Hard Drive Caddy Adapter for 2.5” hard drives, or B+M Key SATA M.2 NGFF SSD to SATA 3 Raiser M.2 to SATA Adapter Expansion Card.

Fits 2.5or M.2 SSD SATA III drives, and adapts to the Standard 3.5 Hard Drive Slot in ATX Cases.

Provides a secure bolt on solution to M.2 SSD or 2.5” hard drives that would otherwise be flopping around in the computer case.

Same size as standard 3.5” hard drive slot.

Dimensions: 101mm x 146mm x 41mm

Fits 2.5” hard drive, or SSD M.2 2230, 2242, 2260 & 2280.
Mounts 2.5” or M.2 SSD B+M Key SATA M.2 NGFF Raiser Adapter Expansion Card.

Note: Does not fit SSD M.2 22110 - 110mm. Does not fit NVMe (NVMe is PCI Express only).

Effortless Storage Integration: Simplify hard drive storage, bolt on solutions, to standard 3.5” ATX Slots.

Recommended to print in PETG, but will print in PLA as well.

Recommended hardware: 4 x M3 6mm self tapping screws

For 2.5” hard drive: 4 M3 6mm machine screws

For M.2 SATA III: 2 x M3 4mm self tapping screws, M.2 to SATA III adapter card: https://www.aliexpress.us/item/3256805313726045.html?spm=a2g0o.order_list.order_list_main.155.21ef1802z83T6G&gatewayAdapt=glo2usa.

Note: NVMe M.2 SSDs cannot be adapted to use SATA III cables. The e in the NVMe protocol stands for PCI Express, and it can only be used directly as a PCI Express device. The NVMe must be mounted directly on the motherboard, or it can be adapted to be used with the USB 3.1 protocol only.

Note: NVMe M.2 SSDs cannot be adapted to use SATA III cables. The e in the NVMe protocol stands for PCI Express, and it can only be used directly as a PCI Express device. The NVMe must be mounted directly on the motherboard, or it can be adapted to be used with the USB 3.1 protocol only.