Please read description and instructions this before ordering...every printer will print differently especially with different filament used, YOU WILL NEED TO MICRO adjust by sanding the tabs to fit accordingly!

This is an addon camera kit option for your Insta360 Ace Pro and/or Ace Pro 2 camera, an existing Ace Pro or Ace Pro 2 cage is required for this to work! I have designed this for two different cages see links below if you need to buy one. There are two grips included and 2 different trigger tabs. The trigger tabs are only specific to the cage but the grips can be used for both IF you have the side cold shoe mount by Insta360 (see link below). There is a hole on the grip so you can use any tether you like as I did in photos.

https://store.insta360.com/product/ace-pro-2-utility-frame?c=3630&from=accessory

https://store.insta360.com/product/ace-pro-2-quick-release-cold-shoe?c=3627&from=accessory

https://rb.gy/w3hmen

** Use this at your own risk, I am not responsible for any damage (s)from misusing this kit.

** With any 3D printing project especially with different types of printers, you will likely have to do some post sanding and finishing, this is the norm.

** This project took a long time for me create, I asked out of courtesy that you do not share or resell the STL as all the items are watermarked inside and outside. I am offering it at a very affordable price. Thank you.

Printer Settings & Notes:

Layer Height: .20mmInfill: 25%Supports: Yes, I used 'tree' support structure

• You can tweak any other settings to your liking as this is what I used and works fine.

** YOU MUST FILE DOWN THE 'BUMPS'...I have designed the cold shoe tabs on the trigger with 'bumps', the reason for this is cold shoe slots I find sometimes vary in depth so you can take a file and file those bumps down to fit. Same with the grips.

If you have any questions, please post a comment. Thank you!