Twenty dropper bottles across the large footprint, angled and label-forward.

WHAT IT ISThe large-footprint rack: twenty dropper bottles held at an angle, using the extra width the large units carry over the medium ones. Each slot has a cut-out behind it so the bottle label reads without lifting it out, and the cut-outs keep the print light for its size.

AT A GLANCEDimensions: 200 × 150 × 150 mm (W × D × H)Capacity: 20 × dropper bottle slots, angledModule: Large, 200 mm footprintMagnets: 6 mm disc magnets in the side pockets (optional)Printing: no supports required

INCLUDED• Rack, printed in one piece• 20 × dropper bottle slots

BUILT TO COMBINE

Every unit in this range is built on the same two rules: a shared footprint grid, and a shared magnet pattern. Units sit flush with their neighbours and lock there with 6 mm disc magnets seated in the side pockets, so a row stays a row while you pull drawers in and out of it. Drawer blocks, top units, racks and holders all use that same grid, which is what lets a bench grow a unit at a time and still line up.

PRINT NOTES

Files are modelled full size in millimetres and print without supports on a typical FDM machine. Magnets are optional — the pockets can be left empty, in which case units simply stand beside each other instead of locking. Print at 100%: the magnet pockets and the module depend on it, so scaling is not supported.

LICENCE

The files are for personal use only. You may not resell, share or redistribute the digital files, and you may not sell physical prints made from them. Independent design, no affiliation with any other company.