Stargate Serpent Guard Cosplay 3D print model
Stargate Serpent Guard Cosplay 3D print model 3D print model
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_0
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_1
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_2
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_3
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_4
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_5
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_6
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_7
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_8
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_9
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_10
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_11
  • Stargate Serpent Guard Cosplay 3D print model 3D print model_12
1 / 13
Useto navigate. Pressescto quit

Stargate Serpent Guard Cosplay 3D print model 3D print model

Description

after popular demand i present the Serpent guard from stargate sg-1.

this is a wearable cosplay helmet and necklace. it is standalone and does not need any previous items. i am also adding a Tealc Bust i made, for display reasons.

I tried adding joints to help connect the pieces. all the STL are aligned for how i printed them, which i hope is easy to print. ive also added the parts as whole pieces so you can cut them how you like. I printed everything 50% as i dont have room for a large cosplay piece, so some of the detail on the printed piece dissapear. all the pieces were printed on my Tronxy x5, which is calibrated for large prints, and not for detail.

The eyes are printed straight up on red PLA, i then removed the back of the piece and connected led diodes. connecters.stl should help connect and align the head piece to the cowl and faceplate

Write comment
A
andyj2004
andyj2004 2024-01-10 22:07:25 UTC
Hi, How big is the head at full scale? I need this for Cosplay but unsure of the sizing
dogbite-junk
dogbite-junk
dogbite-junk 2023-02-27 21:01:29 UTC
If I remember correctly,There are peg holes between every piece
S
siammonf
siammonf 2022-06-16 19:57:41 UTC
I'm currently printing this now, I'm at the stage of putting it together, how did you get the back, head and face to join together?
dogbite-junk
dogbite-junk
dogbite-junk 2022-06-17 04:00:15 UTC
I used a 3d pen to connect the pieces, but any other glue/ epoxy would work
Item rating
5 0
S
siammonf
siammonf 2022-06-28 02:30:50 UTC
Recommended
Helmet turned out amazing, I wore it to Supernova 2022 in Perth WA and it was a hit! Thank you! Only change I had to make was adding a couple of brackets on the shoulders to permanently attach the head piece to it, and I didn't wear the face plate so I could see where I was going.
Stargate Serpent Guard Cosplay 3D print model
$35.00
 
Royalty Free License 
Stargate Serpent Guard Cosplay 3D print model
$35.00
 
Royalty Free License 
Ddogbite-junk
dogbite-junk
(38 reviews)
Response 87% in 2.7h

3D Model formats

Format limitations
  • Stereolithography (.stl) (31 files)74.3 MB

3D Model details

  • Publish date2020-06-13
  • Model ID#2432270
  • Ready for 3D Printing

Similar Models

to Stargate Serpent Guard Cosplay 3D print model
Help
Chat