3D model description

Hi friends, I wanted to bring on my profile, a beautiful light box, maybe to hang in your gaming room or garage, the fantastic logo of the playboy bunny.

The light box is designed to accommodate a beautiful strip of led rgb, so as to create a beautiful effect on the logo, and also, I recommend you to apply some aluminum kitchen paper, at the bottom of the cover, so it ripples more the brightness of the logo.

For the owners of bamboo lab, I made a print file with the right parameters.

I hope you like them, I’ll bring more Light boxes and if you have any in mind, just contact me via messages on cults.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.20 to 0.25mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

3D printing settings

Layer 0.12 or 0.20Temp 215° / 65° PLA - 230° / 65° PETGInfill 15%Top and Bottom Layer 5Perimeter Layer 2Speed Unlimited