Orlando Magic Stand Logo 3D print model

3D MODEL DESCRIPTION Hello friend, today I wanted to bring on my profile, an icon of the world of the NBA, the legendary Orlando Magic.

I want to remind you that on my profile I will carry all the NBA logos, including the oldest, perhaps the most beautiful, of course I will insert them in the new logos, so once you buy a logo, you have the old one available, without paying again.

The dimensions of the logo are 177 x 177 x 30, instead the dimensions of the base are 168 x 87 x 70.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGS Layer 0.10 / 0.15 Temp 205° / 50° PLA --- 230° / 65° PETG Infill 10% Top and Bottom Layer 4 Perimeter Layer 3 No support Speed 50/60 mm/s