3D MODEL DESCRIPTIONHello friends, today on my profile, I wanted to bring the fantastic logos that concern the Milwaukee Bucks, I am really in love with this logo, and I hope that you like it too.

The pieces are divided by color, for such as me you can safely print them and then assemble them with the least tolerance.

The tolerance of this design is 0.25mm

Behind each logo, I made a joint to hang it on the wall by screw.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.20 - 0.25mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

3D PRINTING SETTINGSLayer 0.12Temp 220° / 65°Infill 5%Top and Bottom Layer 4Perimeter Layer 2Speed Unlimited