3D MODEL DESCRIPTIONHello friend, today on my profile, I wanted to bring a very much loved logo, the beautiful logo of Mercedes Benz, and together I also made the AMG logo.

The Mercedes logo has two variants available, one with base, and one without.

The logo is completely modular, you can print the pieces of the color you prefer and then assemble it very easily.

If you do not find the logo in my profile, contact me in the messages section, I will be happy to make it and publish it here.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15 / 0.20Temp 205° / 50° PLA --- 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3Speed 50/60 mm/s