3D MODEL DESCRIPTIONHello friends, today on my profile, I wanted to bring you a really interesting and beautiful project, especially for those like me, is a fan of Harry Potter.

The project can be used in two ways, because it is designed to be a normal decoration, or, you can insert LEDs inside, with a through hole, ranging from the white frame, to the red frame, to finish inside the base, where with the help of a battery lock, glued with hot glue, you can illuminate the project, making it really beautiful.

Another very interesting note, printing the empty pieces, material savings, time, and weight of the finished piece, that’s why I decided not to make them full.

Look carefully at the photos, and if you have any doubts, do not hesitate to contact me, I am here to meet your every need.

The dimensions are 215mm x 40mm for the frame, instead the base measures 200mm x 50mm, also remember that you can resize it to your liking.

The hole for the passage of the led cable, and 7mm

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.10 or 0.15Temp 205° / 50° PLA - 230° / 65° PETGInfill 10%Top and Bottom Layer 5Perimeter Layer 3Speed 50/60 mm/s