3D MODEL DESCRIPTIONHello friend, today I made for you, a wonderful stand to put in your bedroom, or where you like, the fantastic football logo of Zurich.

The size of the product can be found in the photos, so you can better look at the project on the slicer, take a look at the photos.

Obviously the project is divided into pieces, in order to print it, with the various colors of PLA, that compose it, so as not to resort to the colors.

I also want to mention that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf, like many others, I don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time watching my project, and if you find it interesting, I suggest you take a look at my profile of seven, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good friend of the press for anything, contact me by text.

3D PRINTING SETTINGSLayer 0.15Temp 205° / 50° PLA --- 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3No supportSpeed 50/60 mm/s