3D MODEL DESCRIPTIONHi friends, today on my profile, I wanted to bring a logo that I love so much, the shield of Captain America.

The shield was made, so you can put the LEDs inside, and then hang it on the wall, just make a hole in the back of the frame, I did not realize the hole, because each of us hangs it as he sees fit and passes the cable as you want.

Take a good look at the pictures.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.10 or 0.15Temp 205° / 50° PLA - 230° / 65° PETGInfill 10%Top and Bottom Layer 5Perimeter Layer 3Speed 50/60 mm/s