Printed in FDM 0.2 layer height PLA Silver at 90% of 1:6 scale, to fit on my shelf. ED is about 14 inches tall and 13 inches wide. Printed in parts across 20 plates. Print time around 5 days. Overall I am extremely happy with the model. The slicer complained of some non-manifold egdes but I ignored and the model printed great in silver for a die cast look. He looks amazing and even at 0.20mm there are many fine details represented well here. I had to put extra cuts in around the ankle areas to be able to remove the supports cleanly and retain the many small hoses and cables depicted. A couple of small issues I had are that two of the toes are too shallow, like there's 5mm missing off the bottom of each. This may be because of the stand which i chose not to print and was easily fixed using repints of other toes. The only other issue is that one of the back heel foot parts is cut off at an angle, to fit into the base, which seems an odd choice. The model looks amazing though and the work that has gone into it is top tier. I highly recommend a large scale version of this if you have the patience and filament. The level of detail is incredible.