This Bull Statue model is a 3D Print ready model. It is divided into four parts and can be printed in 27cm width with ~1.7mm wall thickness if your printers max active print area is 14x14x14cm, or 38cm width with ~2,5mm wall thickness if your print area is 20x20x20cm. Can be printed bigger depending on your max printing area.
Package includes 3 versions in OBJ and STL formats;
-Multi pieced Shell verison (Empty inside with extraction holes and guide plugs)
-Multi pieced Solid version (Solid with guide plugs)
-Single piece solid version.
After attachment process spray painting is recommended for smooth metalic look, with a primer first and very light spray passes with a minute of drying time in between until fully coated.