A 3D printable photogrammetry scan of a small hand-carved stone donkey figurine. The scan keeps the natural carved surface; scan noise was cleaned by hand, the ears, nostrils and eyes were refined, and the model was made watertight and given flat hoof soles so it stands straight on the build plate.
INCLUDED
- Solid STL in three sizes: 75 mm, 130 mm (original size) and 200 mm tall
- Hollow version for resin printers: 130 mm, 2 mm wall, 4 drain holes hidden in the hoof soles (about 77% less resin)
- 3MF (solid and hollow) and OBJ
- All meshes are watertight / manifold, in millimetres, standing on Z = 0
PRINTING
- Checked for thin walls: nothing thinner than 0.8 mm except tiny spots on the hoof sole rims - printable from 75 mm with a 0.4 mm nozzle.
- FDM: print standing on the hooves with tree / organic supports under the belly and head. Supports are not included - generate them in your slicer.
- Resin: use the hollow file, tilt 30-45 degrees, add supports in Lychee or Chitubox.
Size at 130 mm: 47.6 x 152.3 x 130 mm.
Preview images are renders (PLA-style materials, layer lines simulated), not photos of a physical print.
Also available as a textured, game-ready PBR model in my store.
360° video preview: https://youtu.be/CjpJ61MG2Ls