3D model descriptionHello friends, welcome back to my profile, today I brought you a gadget for nintendo lovers, can not miss in your gaming room.

This pokemon themed container has 17 slots inside to insert your game cartridges, so you do not waste time every time to take the case from the shelf.

Inside you will find two different bases, one with more material, and one with 5 legs, choose the one that you like most friends.

As you can see from the photos, it has no back hinges, so to facilitate printing, using as little as possible media, saving material and printing time, all also printable in different colors, I divided each piece, both for easier printing, also to give the possibility to those who do not have a multicolor printer, to print this fantastic gadget.

The only piece you have to paste is the white button on the black container, and if you can also glue the black container on the white side, I did not paste it because I use it as a hidden container, try it too.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.25, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

3D printing settingsLayer 0.2Material PLA or PETGInfill 10%Top and Bottom Layer 3Perimeter Layer 5Speed Unlimited