Large screwdriver holder with honey comb pattern. The holder is very robust overall. Dimensions 220x114x45 mm.

CUSTOM LARGE HONEYCOMB SCREWDRIVER HOLDER

Finished size: 220 x 114 x 45 mmTool openings: 9 mm hexagonal pattern, intended for medium and large screwdriversMounting: four countersunk wall holes; two holes may be used for lighter loadingMaterial: PETG recommended for a warm workshop; PLA also works indoorsNozzle: 0.4 mmLayer height: 0.20 mmPerimeters: 3 or 4Top/bottom layers: 4Infill: 15-20% gyroidSupports: offBrim: optional if corner adhesion is weak

Print in the supplied orientation with the broad flat back/base on the build plate.Use wall plugs and screws appropriate for the wall material and expected tool load.The geometry is a single watertight part and its lower-left-back corner is at XYZ 0,0,0.