CUSTOM SHARK BAG CLIP - PRINT GUIDE

Finished size: approximately 79.15 x 49.27 x 8.00 mmRecommended file: Custom_Shark_Bag_Clip_Print_In_Place.3mfOrientation: keep the supplied assembly orientation, flat at Z=0Material: PLA or PETGNozzle: 0.4 mmLayer height: 0.20 mmPerimeters: 3Top/bottom layers: 4Infill: 15-20% gyroidSupports: offBrim: off unless bed adhesion is weakElephant-foot compensation: 0.15-0.20 mm recommended

The print-in-place assembly contains five separate watertight moving solids. Do notmerge them in the slicer and do not scale below 100%, because that reduces the jointclearances. After the print cools, gently flex the jaw and lock parts to free the joints.

The shark_clip_components folder contains individually named STL files. Their originalassembly coordinates are preserved, so importing all five together reconstructs the clip.