Apex Legends Mozambique 3D print model
A Perfect Grade replica model of the Mozambique from Apex Legends made by Keyang using Fusion 360.
There are 29 total parts in this 3D printable model. The entire prop is assembled with 2mm diameter screws with lengths varying from 3mm to 8mm. No glue is required for assembly. Print each part slowly (I recommend speeds between 30mm/s to 45mm/s) to ensure the best result, as there are many parts that require precise tolerance in order to fit together. In addition, each part should be printed with layer heights between 0.1mm to 0.2mm (I recommend printing at 0.15mm for exterior parts and 0.1mm for smaller interior parts) to ensure that smaller details are not overlooked. Finally, each part should have around a 10% infill, 3 layers for inner/outer walls, and 6 layers for top/bottom layers.
Enjoy building this model, I will link the source of the screws and the springs required to assemble this model.