UNIVERSAL EGG PAINTING STAND 3D print model

If you like painting eggs this UNIVERSAL EGG PAINTING STAND could be a very helpful tool for you. You do not need to be affraid of spoiling a paint by shaking or touching the egg during the painting process anymore. The great feature of the stand is that it allows to rotate the egg in two axis which gives an easy access to its entire surface without the need of taking it off the stand. All parts of the stand are ready for 3D printing and easy to assemble. Included is of course a 3D egg model. I recommend to print the one which is divided in two parts.

Please follow these assembly instructions below. See attached picture ot the stand assembly plan: 1) glue part A1 and A2 together (my advise is to use a gell cyanoacrylate quick glue) 2) glue 2x part B with part A (A1+A2) 3) glue part C1 and C2 together 4) glue part C with A. Pay attanetion to the correct position of the B parts. 5) glue part D1 and D2 together 6) glue part E and F with D (D1+D2) 7) grind off highlighted parts of the part H (see step 7 in the assembly plan) The part H gets pushed through the hole of part F and rotate by 90 degree to lock the egg in stand. 8) push part G1 through the hole in part E. 9) glue part G1 with G2. Put a small amount of glue in the hole of part G2 and attache it to part G1. Pay attention to not getting the part G (G1+G2) glued with part E because that would prevent part G from rotation the egg. 10) Part I is a locking tool. It locks the part D in a selected angle. Please do not glue this part!!!

Hope you managed to build the stand without a problem. Enjoy.