DESCRIPTION

With your purchase you receive the 3D building model of the Gasometer Oberhausen as DAE, 3DS, C4D and SKP for immediate download. (see details)

Oberhausen’s Gasometer is an industrial monument and exhibition venue. It is situated in Oberhausen Neue Mitte. With its imposing size, the former gas holder is a landmark for Oberhausen and the entire Ruhr area. The Gasometer is an anchor point for the “Industrial Heritage Trail” and the “European Route of Industrial Heritage” (ERIH).

The Gasometer Oberhausen is a former gas holder in Oberhausen, Germany, which has been converted into an exhibition space. It has hosted several large scale exhibitions, including two by Christo and Jeanne-Claude. The Gasometer is an industrial landmark, and an anchor point of the European Route of Industrial Heritage and the Industrial Heritage Trail. It was built in the 1920s, and reconstructed after World War II.

HistoryIn the 1920s the coal and steel industry in the Ruhrgebiet produced blast furnace gas and coal gas as a by-product of iron production and coking, while the steel industry as well as coking used large amounts these gasses or alternative fuels. As supply and demand of gas varied independently, sometimes excess gas had to be flared off, while at other times additional fuel had to be purchased. The Gasometer was built as a buffer: storing excess gas and releasing it again when demand exceeded production.

The Gasometer was built by Gutehoffnungshütte, by the side of the Rhine-Herne Canal. Construction started 27 February 1927 and cost 1.74 million Reichsmark. A framework of 24 steel girders was built on a concrete base, and a skin of 5mm thick sheet metal was riveted to the framework. Inside, a 1,207,000 kg pressure disc was mounted which could freely move up and down, floating on top of the gas underneath and keeping it at a constant pressure. 15 May 1929 the Gasometer was first put into operation, with a maximum capacity of 347,000m³, a height of 117.5m and diameter of 67.6m.

During World War II, the Gasometer was hit by bombs several times, but kept operating.[2] When it was shelled by allied forces it did not explode, but the gas burned up and the pressure disc slowly descended. The Gasometer officially stopped operating 31 December 1944. It was completely disassembled after it had caught fire during repair work on 10 June 1946. Reconstruction began 1949 using the original pressure disc and roof. By 1 June 1950 the Gasometer was operational again.

In 1977 the Gasometer was repainted, at a cost of 3.5 million DM. In later years many coking plants and iron works closed, reducing supply as well as demand for the gas stored in the Gasometer. In addition, natural gas became cheaper. The Gasometer became superfluous and in 1988 it was decommissioned by its owner, Ruhrkohle AG.[1]

A discussion ensued about the dismantling or possible reuse of the Gasometer. In 1992 the city council of Oberhausen, with a margin of 1 vote decided to acquire the building and convert it to an exhibition space. At the time, plans were being developed for building shopping mall (CentrO) on an adjacent plot, and Internationale Bauausstellung Emscher Park planned to use the Gasometer for its exhibition. Ownership transferred to the city of Oberhausen, with Ruhrkohle AG paying 1.8 million DM in saved demolition costs to the city.

Conversion and restoration were done by Deutsche Babcock AG in 1993–1994. The former pressure disc was fixed at 4.5m height, with a 3000m² exhibition space on the ground floor below. The main exhibition space, on top of the pressure disc, was fitted with a stage and seating for 500 people. Lifts and stairs were fitted to provide visitors access to the roof.[3] Conversion cost approximately DM 16 million.

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
Romaneus
RomaneusCommunity member
This user is part of the CGTrader community
Well done!
BEST PRICE GUARANTEED
Found this model cheaper on another marketplace? Let our support team know - we’ll match it.

Gasometer Oberhausen 3D model

Royalty Free License
Hire
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
File formats
OBJ
OBJ<br />File Size: 3.09 MB
3DS
3D Studio<br />File Size: 1.66 MB
SKP
Sketchup<br />File Size: 3.99 MB
MAX
Autodesk 3ds Max<br />File Size: 1.32 MB
DAE
Collada<br />File Size: 3.51 MB
C4D
Cinema 4D<br />Version: 12 - Renderer: Advanced Renderer<br />File Size: 2.38 MB
Provided by designer
Information and details shared directly by the model's designer.
3D Features
The model includes animations (movement or actions) that can be played in supported software or engines.
The model has a skeleton or bone structure, making it ready for posing or animation.
PBR
Uses Physically Based Rendering materials, which give the model realistic lighting and surface properties.
Textures
The model includes image files (textures) that add color, patterns, or detail to its surfaces.
Materials
The model has material settings that define how surfaces look (color, shine, transparency, etc.).
UV Mapping
The model's surfaces are mapped to a 2D image, allowing textures to display correctly.
Plugins Used
Some external plugins were used to create the model. These may be required for full functionality.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is not 3D printable
The designer indicates this model is intended for digital use only (rendering, animation, or AR/VR) and not for 3D printing.
Geometry
Polygon mesh
A model built from polygons (triangles or quads) connected in a mesh.
105772 polygons
The total number of polygons (flat shapes) that make up the 3D model.
/ 212730 vertices
The number of points (corners) that define the shape of the model's polygons.
Unwrapped UVs
Publish date
Model ID
Chat