DESCRIPTION

Hypercar Roadster 2026 - Rigged with booster animation (Check Vimeo video for booster animation)

A two-seat electric hypercar roadster of 2026 in its top version, complete inside and out: body, glass, butterfly doors, the rear spoiler that lifts out of the deck, lights, wheels and tyres, the full chassis and running gear, the battery with every cell, the twin-motor drive, cooling, a cold-gas thrust system and the cabin. Made for car commercials, technology presentations, cut-away and explainer animations, film and close-up renders.

RIG AND ANIMATION

  • 22 pivots at the real hinge points: butterfly doors, steering with the tie rods following, all four wheels rolling, the spoiler with its arms and pitch rams
  • 750 frames at 24 fps: doors, spoiler, then a short drive through an S-bend; the same keys in Blender, Maya, FBX and GLB

BOOSTER SHOW (its own files)

  • 82 seconds, 1,975 frames, after the basic animation: lift-off on the jets, a turn on the spot, launch, up a curved wall, upside down through the curl, a leap over a truck with a full roll, landing
  • Night stage with the wall track and truck, show cameras, light smoke stored inside the file
  • Blender 4.5 or newer, one file set up for EEVEE and one for Cycles; Maya 2023 with Arnold, the smoke as an OpenVDB sequence

WHAT IS INSIDE

  • Chassis, push-rod suspension, brakes, steer-by-wire rack
  • Floor battery with 931 cylindrical cells, twin-motor rear drive with inverters, radiators and climate unit
  • Cold-gas thrust system with vessel, pipes and nozzles; four suction fans with a small jet engine in each
  • Cabin: two seats, suede dashboard, yoke steering, centre screen, pedals, lit door panels

MODEL

  • 48 objects, all quads: 229,315 faces, no triangles, no n-gons; every part a closed solid
  • 112,988 hard edges marked; parts sorted by kind in Blender collections and Maya display layers
  • Real-world scale

FORMATS

  • Day and Night versions of each: Blender 4.1 or newer (.blend, Cycles), Maya 2023 or newer (.ma, Arnold), FBX and glTF binary (.glb) with textures inside
  • FBX: set the glass, clear coat and suede sheen again in your program

MATERIALS, TEXTURES, UVS

  • 43 PBR materials, 21 original PNG textures in 7 sets (colour, roughness, normal map), 1024 to 4096 px, no photos
  • Every part unwrapped, no overlapping UVs, one texture density inside each set

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
There are no reviews or comments yet. Please be the first one to write it.
NEW
Recently added to CGTrader - explore one of the latest models on the marketplace.

Hypercar Roadster 2026 - Rigged with booster animation 3D model

Editorial License (no AI)
$175.00
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
File formats
VDB
VDB<br />File Size: 44.2 MB
MA
Autodesk Maya | 3 files<br />File Size: 111 MB
BLEND
Blender | 4 files<br />File Size: 415 MB
FBX
Autodesk FBX | 2 files<br />File Size: 150 MB
GLTF
glTF | 2 files<br />File Size: 165 MB
PNG
PNG<br />File Size: 62.3 MB
Verified by CGTrader
Verified models are of higher quality as they have
passed CGT Standard technical and visual checks,
making them more professional-grade 3D assets.
Learn more.
FBX
This FBX file has successfully passed the CGT Standard technical and visual checks. The verification results are detailed in the section below.
File & scene
Binary FBX
Binary FBX file is more compact and faster to load and process.
Learn more
No unsupported objects
Unsupported objects:
- Lights
- Cameras
Learn more
Geometry
No N-gons
N-gons are polygons with five or more sides which might cause issues in certain processes like rendering or animation. Learn more
No faceted geometry
Faceted geometry uses flat surfaces without smoothing, which can look unrealistic on curves.
Learn more
Manifold geometry
Manifold geometry ensures all surfaces are properly connected, avoiding issues like edges shared by more than two faces.
Learn more
Textures & material
PBR textures
PBR textures simulate how light interacts with materials, making the model look realistic under different lighting.
Required PBR textures:
- Base Color
- Roughness
- Metalness
- Normal
Learn more
No embed textures
Embedded textures are stored inside the model file, increasing its size and sometimes causing compatibility issues.
Learn more
Square textures
Texture aspect ratio is the width-to-height ratio of a texture. Expected texture aspect ratio: 1:1
Learn more
Power of 2 texture sizes
Textures with dimensions in power of two (e.g. 512x512px, 1024x1024px) are used to optimize performance and memory usage.
Learn more
Assigned materials
Materials are applied to the 3D model to allow visualize a model's surface properties and appearance.
Learn more
UVs & naming
No UV overlaps
UVs overlap when multiple points on the 3D model's surface are mapped to the same point on the UV island causing texture stretching.
Learn more
UV unwrapped model
A UV unwrapped model means its 3D surface is flattened into 2D space, allowing textures to be applied accurately.
Learn more
Allowed characters
Allowed ASCII characters: a-zA-Z0-9-_
Learn more
Provided by designer
Information and details shared directly by the model's designer.
3D Features
The model includes animations (movement or actions) that can be played in supported software or engines.
The model has a skeleton or bone structure, making it ready for posing or animation.
PBR
Uses Physically Based Rendering materials, which give the model realistic lighting and surface properties.
Textures
The model includes image files (textures) that add color, patterns, or detail to its surfaces.
Materials
The model has material settings that define how surfaces look (color, shine, transparency, etc.).
UV Mapping
The model's surfaces are mapped to a 2D image, allowing textures to display correctly.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is not 3D printable
The designer indicates this model is intended for digital use only (rendering, animation, or AR/VR) and not for 3D printing.
Geometry
Polygon mesh
A model built from polygons (triangles or quads) connected in a mesh.
229315 polygons
The total number of polygons (flat shapes) that make up the 3D model.
/
232773 vertices
The number of points (corners) that define the shape of the model's polygons.
Unwrapped UVs
Publish date
Model ID
Chat