Starwars AT-ST and Tie Fighter collection

The collection consists of:2 models total

Grab both models for a discounted price.

Starwars Tie Fighter. model consists of 86 stl files in seperate folders for each part of the model, The model in the photographs measures 15 inches from solar panel to solar panel, The solar panels themselves measure 20 inches top to bottom and 16 inches front to back. model has been designed with the intention of allowing builders to wire up the model for cockpit lighting. The way i have done it is the two support bars are equiped with + and - terminals that contact two brass plates in the arms of the cockpit, from there wires are soldered to the brass plates that attach to led bulbs of fiber optics, the choice is up to youif you wish to illuminate the cockpit.

Starwars AT-ST. Another addition to my growing fleet of starwars vehicles. this fella stands unsupported at 730mm, the roof is removable to view cockpit which will have the equipment bay fitted out in the near future, toes, neck, top hatch and side weapons all move. this was a fun build. stl files modelled at 1/72 nd scale, this model is scaled up to 400% which makes it 1/18th scale. model consists of 111 stl files in seperate folders for each part of the model, also included are drawings and photos showing the construction of a metal framework for the legs, this is optional but if you want to put the metal skeleton in the drawings should help. there is a file called Jigs that can help with the orientaion of the holes but to be honest i found the easiest way was to print out the lage parts then measure and fit the metal bars to fit and using a sharp point scribe the hole locations then drill and file to shape. all cross bars are dimensioned.

  • CADAgency708CADAgency708
    2020-05-06 07:33
    Nice work!!!!
    • cg-mancg-man
      2020-05-06 21:21
      • rrodrigo-sifuentes-1977
        2021-01-15 04:38
        Hi, im a noob on 3d printing, if i buy this item, can you guide me about settings (fill, supports, etc) for a 1/12 scale?, a have a CR 10s5 (500x500x500mm)
        This product has no reviews yet
        Starwars AT-ST and Tie Fighter collection
        All prices are exclusive of VAT
        Save with CGTrader Credits
        Editorial License
        The product can only be used in an editorial manner (educational, non-commercializable<br/> personal project, in newsworthy and of public interest events) and may not be used for any<br/> commercial, promotional, or merchandising purposes.<br/> <a href='/pages/terms-and-conditions#general-terms-of-licensing' rel='nofollow' target='_blank'>Read more</a>
        Response 90% in 2.3h
        3D Print Modeling
        Hire me
        3D model formats
        • Stereolithography(.stl) 2/2
        3D model details
        • Publish date2019-12-10
        • Collection ID#2192524
        • Animated 0/2
        • Rigged 0/2
        • VR / AR / Low-poly 0/2
        • PBR 0/2