Ford 9 inch rear end, work in progress. This file was reduced from a larger scale. I have also separated the pieces to make it easier to print.

Update 06/11/24Repaired and revised all parts, Rev B. There are 2 versions, I have relabeled them as Version A and Version B. Both have 1 piece and separate parts. Can be downloaded individually or one zip file

Update 01/02/21Fixed issues with holes in object, Rev A has been uploaded

Update 12/26/20Revised the 9 inch ford axle for resin printing

Update 4/21/19:

1. uploaded a set of disc brakes, layered height at .12, infil 10%, print speed 40 mm/s, no support
2. Axle shaft, same as above, no support needed
3. Rear pumpkin, 2 piece, no support needed. But this one is still a work in progress as it didn't print out smoothly
4. Removed original file, I made the files separate as it had a hard time printing a whole set

If you do print and come across any issues please let me know

Disclaimer:

• Intended for personal use
• The resale of my files is NOT allowed
• Printing for commercial use is NOT allowedFor authorizations and concessions please contact me here or on Instagram.If you need it printed, please contact @Andy_Lesiak or @Chris_Sunter for their 3d printing services.