1-25th scale 69 Pro Street Chevy C10 Free 3D print model

Making this printable in 1/25th scale. But as a Pro Street Truck with chassis, interior etc. This is a work in progress. I will be adding files as I go along. I will also be including a stock version down the road. Original body design was made by by Alexby in 1/10th scale and meant for Traxxis (RC car/truck chassis). AMT did produce a 69 Chevy Fleetside but that kit is super rare these days. I included a photo of that kit. You just have to provide your own wheels and motor.

For those who are looking for a stock interior. I came across these files for a Chevrolet Panel Truck 1970. It isn't free and is available in CGTraders or cults3d, author is Andrey Bezrodny @coachbuilder_ua

A GMC grill for the front end can be found here at cgtrader, 1972 GMC suburban also made by Andrey Bezrodny, @coachbuilder_ua. Alternative grills for the Chevy can be found under my designs, look for the design 'Late 60s and early 70s Chevy Truck Grills 3D print model'

Let me know if you require something to be added to the files. A zip file is also available if you just want a single download.

UPDATE: 11/24/24Added new files Rev A and one Rev B, cabs, doors, bed panels, hoods and roof have been thickened by .15mm and smooth out. Shout out to @furryfellah for the tip

UPDATE: 6/01/24Added new files, cab, doors, hood has been thickened by .3mm. Zip files with thickened added.

UPDATE: 4/25/24Added half chassis for those who have smaller printers. Also added a GMC Tailgate

UPDATE: 11/26/23Added the original doors with window frame and rear doors with window frames.

UPDATE: 9/26/23Added two versions of truck bed, one with license plate holder in roll pan and the other with no license plate. Both of these have thicker walls as per request.

UPDATE: 9/23/23Revised the crewcab roof, Rev A

UPDATE: 9/18/23Revised the front grills, apparently it was missing the vertical slats, Rev A.

UPDATE: 9/13/23Reworked a few parts, all four inner door panels, console with cup holders and front seat, Rev. A

UPDATE: 9/10/2Added rear valance panel license plate area delete, missing rear bumper and reworked the Ford 9rearend, Rev B. Added 1 zip file for everything under the file name1_25th_scale_69_Pro_Street_Chevy_C10"

UPDATE: 9/06/2Finally completed this Truck, but you will have to provide your own engine and wheels

UPDATE: 5/21/22My bad, when I created the tires, I had made them directional. So I added the corrected tires, all 4 files have been uploaded, Rev A for 15s and 17s

UPDATE: 5/08/22Uploaded Rear tires, two sizes, first is a 15x15s and the second is 15x17s

UPDATE: 2/05/22The model is about 85% completed, Some things were a bit frustrating. I'll will slowly add more files but it is still a work in progress. Added 3 types of Hoods, Stock, Cowl induction and Blower hood

UPDATE: 11/23/21Made a set of pedals for this truck, original file came from thingiverse, thing:4655106 which I had modified it to use for this truck

UPDATE: 10/20/21Not much of an update, but tweak the design for another option build. A Pro-street 69 four door C10 boulevard cruiser

UPDATE: 10/19/21-Refined and corrected some areas of the truck bed, Rev F.-Reworked the tailgate to have it a little pronounced lettering, Rev A plus separated the latch as an additional piece so it can be painted a separate color-The rest of the parts are almost done.

UPDATE: 10/11/21Uploaded Rev D, had to make clearance in the front of the truck bed for the frames to pass through

UPDATE: 10/10/21Uploaded Rev C for the Pro Street truck bed. Thicker panels and prints good now in 1/25th scale

UPDATE: 10/09/21Uploaded a revised truck bed, this time with wall supports, Rev B

UPDATE: 10/06/21Revised the truck bed, made the walls a little thicker and smoother, Rev A for both Pro Street and stock beds. Also added the tailgate

UPDATE: 10/02/21Added the tail lights and corrected the lens, Rev A has been uploaded. Uploaded file for the side markers as well

UPDATE: 9/25/21Added the stock truck bed, this will have the options of stock hood, opened hood, cowl induction and Wall E Blower scoop