I designed my own trashcan to collect my 3D print waste. It consists of two parts.Glue the two parts together with some (transparent!) glue and you have a multicolor trash can if you print it like i did.You can also try to print it in other colors, even non transparent.
Usage of any models from 3DParts4U will be at your own risk!
My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second) (vase mode)
- hotend 185°C | bed 50°C
- 250 micron | infill 20%
- 0 top layers | 5 bottom layers | 1 outline layer
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- no support needed
