Compact, lightweight mini fork designed specifically for outdoor use and efficient 3D printing.

This model features a clean geometric design with a reinforced handle and optimized structure for FDM printing. The lightweight lattice pattern reduces material usage while maintaining strength and durability.

• Perfect for:
• picnics
• camping
• travel kits
• everyday carry (EDC)

Key Features

• Optimized for 0.4 mm nozzle
• Lightweight structure (reduced filament usage)
• Strong and durable geometry
• Clean, support-free printing
• Compact and portable size

Dimensions

• Length: 130 mm
• Width: 24 mm
• Thickness: 2.4 mm

Recommended Print Settings

• Material: PLA / PETG
• Layer height: 0.2 mm
• Infill: 100% (or 3–4 perimeters)
• Orientation: flat on bed

Printing Notes

For best results, it is recommended to use a skirt or brim during printing.Due to the elongated shape of the model, slight warping may occur depending on printer settings and bed adhesion.Recommended:Use brim (3–5 mm) for better adhesionEnsure proper bed levelingUse a clean and well-prepared build surface

Safety & Usage DisclaimerIt is highly recommended to use certified Food-Safe PLA or PETG filament.This product is intended for use with cold and room-temperature food only.

Due to the nature of PLA material:

• Do not expose to high temperatures (Keep away from open flames or hot car interiors).
  • Do not use with hot food (Material softens above 60°C / 140°F).
  • NOT suitable for microwave or dishwasher use.